Metrics
Publication
35
UN Sustainable Development Goals
Biography
Dr. Ayşe Çağıl Kandemir received her bachelor's (2004-2008) and master's degrees (2008-2011) from METU Metallurgical and Materials Engineering Department. She started her academic career as a research assistant in the same department.She completed her doctoral studies in the Materials Science Department of ETH Zürich between 2011-2016. She worked as a research assistant in ETH Zürich for four years.
Her research interests include composite and nanocomposite materials, surface science/thin films, atomic force microscopy/lithography. Since June 2018, she has been a faculty member at TEDU Mechanical Engineering Department.
Her research interests include composite and nanocomposite materials, surface science/thin films, atomic force microscopy/lithography. Since June 2018, she has been a faculty member at TEDU Mechanical Engineering Department.
Education
2011 - 2016
2011 - 2016Doctorate
ETH Zurich, Switzerland
2008 - 2011
2008 - 2011Postgraduate
Middle East Technical University, Turkey
2003 - 2008
2003 - 2008Undergraduate
Middle East Technical University, Turkey
Academic Positions
2018 - Continues
2018 - ContinuesAssistant Professor
TED University, Faculty of Engineering, Department of Mechanical Engineering
Managerial Experience
2022 - Continues
2022 - ContinuesHead of Department
TED University, Graduate School, Mechatronics Engineering
2020 - Continues
2020 - ContinuesLibrary
2023 - 2024
2023 - 2024Assistant Director of the Institute
TED University, Graduate School
Courses
Supervised Theses
in Progress
in ProgressPostgraduate
Layered Architectures for Enhanced Mechanical Performance in Biocompatible Nanocomposite Films
Kandemir A. Ç. (Advisor)
S.Çelik(Student)
in Progress
in ProgressPostgraduate
Machine Learning-Driven Prediction of Elastic Modulus in Clay-Reinforced Polymer Nanocomposites
Nur Yılmaz G., Kandemir A. Ç. (Co-Advisor)
B.Dolunay(Student)
2022
2022Postgraduate
DESIGN, PREPARATION AND CHARACTERIZATION OF BIO-INSPIRED HIERARCHICAL POLYMER NANOCOMPOSITES
Kaplan Can H., Kandemir A. Ç. (Co-Advisor)
F.DÖNMEZ(Student)
Journal articles indexed in SCI, SSCI, and AHCI
2025
20251. Mechanical Characterization of Polymer Nanocomposite Films: Influence of Force Regimes and Nano Silica Reinforcement
Kandemir A. Ç.
POLYMER COMPOSITES
, vol.46, no.15, pp.14447-14460, 2025 (SCI-Expanded)
2025
20252. Impact of gradient nanocomposite coating design on the surface mechanical properties of soft composite substrate
Kandemir A. Ç., Sajid A., Khan M., Rafiq T., Can H.
PROGRESS IN ORGANIC COATINGS
, vol.204, pp.1-15, 2025 (SCI-Expanded)
2025
20253. Fracture surface evaluation of adhesively bonded dissimilar joints reinforced with nanoclay
Dizeci Ş., Khabaz-Aghdam A., Kandemir A. Ç.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
, vol.39, no.11, pp.1757-1777, 2025 (SCI-Expanded)
2025
20254. Assessment of compatibility of dextran/PEMA blends by thermal, topologic and viscoelastic analysis
Kavlak S., Kandemir A. Ç., Can H.
CARBOHYDRATE POLYMERS
, vol.348, 2025 (SCI-Expanded)
2024
20245. Comparative fracture surface analysis of adhesively bonded dissimilar lap joints: Nanosilica effect
Dizeci Ş., Khabaz-Aghdam A., Kandemir A. Ç.
POLYMER COMPOSITES
, vol.45, no.15, pp.13676-13687, 2024 (SCI-Expanded)
2024
20246. Biocompatible organic coating fabrication via polymer/clay nanocomposites: Evaluation of mechanical improvements
Kandemir A. Ç., Donmez F., Can H.
POLYMER COMPOSITES
, vol.45, no.3, pp.2352-2366, 2024 (SCI-Expanded)
2022
20227. Design and fabrication of polymer micro/nano composites with two-level mechanical reinforcing procedure
Kandemir A. Ç., Donmez F., Davut K., Can H.
POLYMER COMPOSITES
, vol.43, no.7, pp.4609-4625, 2022 (SCI-Expanded)
2022
20228. Biocompatible nanocomposite production via nanoclays with diverse morphology
Donmez F., Kandemir A. Ç., Can H.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION
, vol.27, no.3, pp.158-179, 2022 (SCI-Expanded)
2017
20179. Gradient nanocomposite printing by dip pen nanolithography
Kandemir A. Ç., Ramakrishna S., Erdem D., Courty D., Spolenak R.
COMPOSITES SCIENCE AND TECHNOLOGY
, vol.138, pp.186-200, 2017 (SCI-Expanded)
2016
201610. Polymer nanocomposite patterning by dippen nanolithography
Kandemir A. Ç., Erdem D., Ma H., Reiser A., Spolenak R.
NANOTECHNOLOGY
, vol.27, no.13, 2016 (SCI-Expanded)
2015
201511. Liquid-phase deposition of ferroelectrically switchable nanoparticle-based BaTiO3 films of macroscopically controlled thickness
Erdem D., Shi Y., Heiligtag F., Kandemir A. Ç., Tervoort E., Rupp J., et al.
JOURNAL OF MATERIALS CHEMISTRY C
, vol.3, no.38, pp.9833-9841, 2015 (SCI-Expanded)
2013
201312. Use of zinc borate as the third component of a traditional brominated flame retardant system in acrylonitrile butadiene styrene
KAYNAK C., Kandemir A. Ç.
FIRE AND MATERIALS
, vol.37, no.7, pp.491-502, 2013 (SCI-Expanded)
2012
201213. Contribution of Nanoclays to the Performance of Traditional Flame Retardants in ABS
Kandemir A. Ç., KAYNAK C.
POLYMER COMPOSITES
, vol.33, no.3, pp.420-429, 2012 (SCI-Expanded)
Articles Published in Other Journals
2023
20231. Effects of Silica/Clay Nanoparticles on Microstructural and Mechanical Properties of Epoxy Based Adhesives
Dizeci Ş., Kandemir A. Ç.
Hacettepe Journal of Biology and Chemistry , vol.2, no.51, pp.153-161, 2023 (Peer-Reviewed Journal)
2022
20222. CONTRIBUTION OF MICRO-SILICA AND NANO-MONTMORILLONITE REINFORCEMENTS ON THE MECHANICAL PROPERTIES OF UV-CURABLE THERMOSET RESIN
Kandemir A. Ç., Baytaroglu A.
ESKİŞEHİR TECHNICAL UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY , vol.23, no.4, pp.233-243, 2022 (Peer-Reviewed Journal)
Papers Presented at Peer-Reviewed Scientific Conferences
2025
20251. Structurally Engineered PVA-Based Hybrid Coatings with Hierarchical Organic–Inorganic Nanofillers for Enhanced Thermal and Surface Properties
DİLAVER B., KANDEMİR A. Ç., KAPLAN CAN H.
NanoTR19: 19th Nanoscience and Nanotechnology Conference, Ankara, Turkey, 28 August 2025, (Summary Text)
2025
20252. Surface Mechanics Engineering with Graded Biocomposite Films: Interplay of Layer Architecture and Force Regimes
KANDEMİR A. Ç., KAPLAN CAN H.
NanoTR19: 19th Nanoscience and Nanotechnology Conference, Ankara, Turkey, 29 August 2025, (Summary Text)
2025
20253. Tailoring Mechanical Response in Poly(vinyl alcohol)–Bentonite Nanocomposite Films via Spatial Layer Architecture
Çelik S., DİLAVER B., KAPLAN CAN H., KANDEMİR A. Ç.
NanoTR19: 19th Nanoscience and Nanotechnology Conference, Ankara, Turkey, 28 August 2025, (Summary Text)
2025
20254. SELF-ASSEMBLY HİIERARCHICALLY STRUCTURED ORGANIC-INORGANIC TAILORED NANOCOMPOSITE COATING SYSTEMS
DİLAVER B., KANDEMİR A. Ç., KAPLAN CAN H.
10th International paintistanbul&Turkcoat Congress and Exhibition, İstanbul, Turkey, 17 June 2025, (Summary Text)
2025
20255. Optimized Gradient Coatings and the Unexplored Potential of Reverse Gradient Coating Designs
KANDEMİR A. Ç., KAPLAN CAN H.
10th International paintistanbul&Turkcoat Congress and Exhibition, İstanbul, Turkey, 28 May 2025, (Summary Text)
2023
20236. Multi-Scaled Polymer Nanocomposite Fabrication
Kandemir A. Ç.
8th International Conference on MATERIALS SCIENCE & ENGINEERING, Paris, France, 21 - 22 September 2023, pp.1, (Summary Text)
2024
20247. Spectroscopic and Thermal Characterization of Polystyrene and Its Composites with Silica and Halloysite Additives
DİLAVER B., KANDEMİR A. Ç., KAPLAN CAN H.
IX. Polymer Science and Technology Congress with International Participation, Ankara, Turkey, 17 September 2024, (Summary Text)
2024
20248. Bioinspired Hierarchical Composite: Balancing Toughness and Strength through Multi-Scale Design
Kandemir A. Ç., Dizeci Ş., Music O., Donmez F., Kaplan Can H.
MecaNano 2nd General Meeting , Vienna, Austria, 1 - 03 May 2024, pp.19, (Full Text)
2024
20249. Machine Learning-Driven Prediction of Elastic Modulus in Clay-Reinforced Polymer Nanocomposites
Nur Yılmaz G., Kandemir A. Ç.
MecaNano 2nd General Meeting , Vienna, Austria, 1 - 03 May 2024, pp.78, (Summary Text)
2022
202210. Design and Fabrication of Green Nanocomposites of Poly(N-vinyl pyrrolidone)
Kandemir A. Ç., Dönmez F., Kaplan Can H.
3rd International Conference on Polymer Science and Composite Materials, Rome, Italy, 3 - 05 October 2022, pp.13, (Summary Text)
2022
202211. Biocompatible Polymer Micro/Nano Composite Fabrication via two-level Mechanical Reinforcement
Kandemir A. Ç., Dönmez F., Kaplan Can H.
5th Edition of Conference on Nanotechnology, Massachusetts, United States Of America, 12 September 2022, pp.1, (Summary Text)
2022
202212. Fabrication and Nanomechanical Analysis of Organic Coatings
Özkan A. G., Ayadenk G., Boydaş S., Kandemir A. Ç.
16th Nanoscience and Nanotechnology Conference, Ankara, Turkey, 5 - 08 September 2022, pp.303, (Summary Text)
0
013. Poly(N-vinyl pyrrolidone) and Tubular/Layered Clay Green Nanocomposites: Synthesis and Characterization
donmez f., Kandemir A. Ç., Kaplan Can H.
0
014. Polivinil pirolidon (PVP)/Halloysit Nanokompozitlerin Sentezi ve Karakterizasyonu
Dönmez F., Kaplan Can H., Kandemir A. Ç.
0
016. Polymer and Polymer Nanocomposite Patterning by Dip Pen Nanolithography
Kandemir A. Ç., Erdem D., Niederberger M., Spolenak R.
0
017. USING MICRO AND NANO COMPOSITE APPROACHES TO IMPROVE FLAME RETARDANCY OF ABS
Kaynak C., Ozkaraca A. C., Kandemir A. Ç.
2012
201218. Using micro-and nano-composite approaches to improve flame retardancy of ABS
KAYNAK C., Kandemir A. Ç.
15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, Italy, 24 - 28 June 2012, (Full Text)
Funded Projects
2023 - 2027
2023 - 2027European Materials Acceleration Center for Energy (EU-MACE)
TÜBİTAK - AB COST Project
(Project Abstract)
Kandemir (Working Group Member) A. Ç.
2022 - 2026
2022 - 2026
European Network for the Mechanics of Matter at the Nano-Scale (MecaNano)
TÜBİTAK - AB COST Project
(Project Abstract)
Çakır Hatır (Management Committee) P., Hanay (Management Committee) M. S., Kandemir (Working Groups) A. Ç., Nur Yılmaz Working Group Member) G.
2023 - 2025
2023 - 2025
Düzenli Ve Düzensiz Şekilli Mikroplastik Parçacıkların Çökelme Hızlarının Deneysel, Sayısal Ve Derin Öğrenmeye Dayanan Yöntemlerle Araştırılması
TUBITAK Project , 1001 - Program for Supporting Scientific and Technological Research Projects
(Project Abstract)
Numanoğlu Genç A. (Executive), Kökpınar M. A., Baş O., Kandemir A. Ç., Nur Yılmaz G., Kaplan Can H., et al.
2023 - 2024
2023 - 2024
Multi-scaled Bio-Composite Fabrication via Spatially Graded Particles
Project Supported by Higher Education Institutions , BAP Research Project
(Project Abstract)
Kandemir A. Ç. (Executive), Sajid A., Rafiq T., Khan M. A.
2022 - 2024
2022 - 2024
Farklı Malzemelerin Yapıştırılmasında Kapsayıcı Hasar Tespit Modelinin Geliştirilmesi
TUBITAK Project , 3501 - National Young Researcher Career Development Program
(Project Abstract)
Dızecı Ş. (Executive), Kandemir A. Ç.
2020 - 2022
2020 - 2022Nacre-Mimetic Biofilm Production
Project Supported by Higher Education Institutions , BAP Research Project
(Project Abstract)
Kandemır A. Ç. (Executive)
2019 - 2022
2019 - 2022
Biyolojik Sistemlerden Esinlenmiş Hiyerarşik Ölçekli ve Parçaçık Yoğunluğuna göre Değişen Polimer Kompozit Üretimi
TUBITAK Project , 3501 - National Young Researcher Career Development Program
(Project Abstract)
Kandemir A. Ç. (Executive), Dızecı Ş.
2020 - 2021
2020 - 2021Green Nanocomposite Production
Project Supported by Higher Education Institutions , University Supported Other Projects
(Project Abstract)
KANDEMIR A. Ç., Demiral O. A.
2019 - 2020
2019 - 2020Bioinspired Hierarchical Composites
Project Supported by Higher Education Institutions , BAP Other
(Project Abstract)
KANDEMIR A. Ç., Baytaroglu S. A.
Peer Reviews in Scientific Publications
August 2025
August 2025LANGMUIR
Journal Indexed in SCI-E
July 2025
July 2025JOURNAL OF COMPOSITE MATERIALS
Journal Indexed in SCI-E
June 2025
June 2025ADVANCED ENGINEERING MATERIALS
SCI Journal
Scientific Research / Working Group Memberships
2023 - Continues
2023 - Continues
Ca22123 - European Materials Acceleration Center For Energy (Eu-Mace)
https://eu-mace.eu/
, Belgium
2023 - Continues
2023 - Continues